TECHNICAL SPECIFICATIONS
400 Series
. . . Email us at info@mech-tronics.com
Model 406 Preamplifier
| MODEL 406 PREAMPLIFIER |  |
|
|
GENERAL DESCRIPTION
The Model 406 fast preamplifier features a DC stabilized wide band direct-coupled hybrid amplifier. This preamplifier is intended for use with photomultipliers, electron multipliers and other detectors used in photon or ion counting and fast timing applications.
The preamplifier has a fixed voltage gain of 10 when terminated in 50 ohms. Input and output impedances are 50 ohms to permit signal transmission with matched 50 ohm cable and connectors. A 10 foot long power cable is supplied with the Model 406 to provide for connection to the appropriate Mech-Tronics amplifier or discriminator. (Model 511-01, typically).
SPECIFICATIONS
PERFORMANCE |
|
| Input and Output Impedance: | 50 ohms direct-coupled |
| Voltage Gain: | 10 when terminated in 50 ohms (non-inverting) |
| Rise Time: | Less than 1.8 nsec. |
| Noise: | 40 micro volts RMS, input equivalent |
| Output: | Greater than ±1 volt when terminated in 50 ohms |
| Linearity: | ±1% to ±1 volt |
CONTROLS |
|
| Output DC level: | Internal adjustment to provide for zero of output DC level |
| Band Width: | Internal control to provide gain equalization of DC stabilization and wide band amplifiers. |
CONNECTORS |
|
| Input and Output: | BNC UG1094A/U |
| Power: | 9 pin "D" connector provides power from compatible amplifier |
| Power Requirements: | ±12 volts @ 35mA |
| Cables Supplied: | 10 foot long power cable #186329-00 |
| Ordering Information: | Ordering Stock No. | ||
| 000406-00 | Preamplifier | ||
| (Shipping Weight 3.0 lb.) |
LINKS . . .
| Mech-Tronics | Nuclear Division | |
| 1635 N. 25th Avenue | (708) 344-0202 | |
| Melrose Park, IL 60160 | ||
| (708) 344-9823 Fax (708) 344-0067 |
Email us at info@mech-tronics.com
Return to Mech-Tronics Services Page.
Return to Mech-Tronics Home Page.
Copyright © 1998 Mech-Tronics, All Rights Reserved