TECHNICAL SPECIFICATIONS
200 Series

. . . Email us at info@mech-tronics.com

Model 201 Power Supply

SIX OUTPUT NIM BIN SUPPLY
  • 170 watt D.C. power output exceeds NIM V-H requirements.
  • Class "H" Transformer (180°C), all Teflon wire and 105°C rated capacitors for maximum reliability.
  • Optional Routing connector cover available.

SPECIFICATIONS

 

Input: 103-129V (117V nominal), or 206-258VAC (234 nominal), 47-65 Hz, 400 watts
Output: ±24VDC, 0-1.5 each, 2A Max. combined total.
±12VDC, 0-3A each, 4A Max. combined total.
±6VDC, 0-10A each, 12A Max. combined total.
Maximum combined output power, 170 watts with balanced loads on 6, 12 & 24 volt outputs. 150 watts with unbalanced loads. 117VAC at 0.5A.
Regulation: ±0.05% over the combined range of output load and input voltage.
Short Term Stability: After 1 hour warm-up, less than ±0.2% for a 24 hour period over the combined range of output load and input voltage with constant ambient temperature.
Long Term Stability: After 1 hour warm-up, less than ±0.5% for a six month period over the combined range of output load and input voltage with constant ambient temperature.
Ripple and Noise: The combined ripple and noise on any DC voltage does not exceed 3mV peak to peak.
Operating Temperature: 0-50°C without derating. Derate 3%/°C to 60°C.
Temperature Coefficient: The change in any DC voltage is less than 0.01%/°C from 0°C to 60°C.
Output Impedance: The output impedance of any DC voltage is less than 0.3 ohm at any frequency up to 100 kHz.
Power Cord: 3 wire line cord (8' long).

Ordering Information: Ordering Stock No.
000201-00 Six Output NIM Bin Supply
(Shipping Weight 29.0 lb.)
Options: 900201-01 Routing Connectors
900201-02 234 VAC Input
900201-03 234 VAC Input with Routing Connectors

LINKS . . .

Product Listing PRODUCTS

150 Series Instrument Bins Tech Spec

SPECS
Model 200 Four Output Power Supply Tech Spec SPECS

Mech-Tronics   Nuclear Division
1635 N. 25th Avenue   (708) 344-0202
Melrose Park, IL  60160    
(708) 344-9823  Fax (708) 344-0067    

A leader in Precision Metal Fabrication | Photo Chemical Etching
Aluminum Dip Brazing | Nuclear Instrumentation

Email us at info@mech-tronics.com
Return to Mech-Tronics Services Page.
Return to Mech-Tronics Home Page.

Copyright © 1998 Mech-Tronics, All Rights Reserved